Set Configuration - Pole-Pole Survey

Use the Pole-Pole Survey dialog option to setup parameters for a Pole-Pole survey.

Pole-Pole Survey dialog options

Array Type

The Array type is displayed.

Current Electrode X (T2X)

Current Electrode Y (T2Y)

Current Electrode Z (T2Z)

The distance current electrode location. The distance current electrode location. This location is used to calculate apparent resistivity. If X or Y is left blank, it is assumed that the electrode is at infinity. If the Z value is left blank, then no topographic correction can be applied for calculated resistivities.

Script Parameter: IP.T2X, IP.T2Y, IP.T2Z

Potential Electrode X (R2X)

Potential Electrode Y (R2Y)

Potential Electrode Z (R2Z)

The distance potential electrode location. This location is used to calculate apparent resistivity. If X or Y is left blank, it is assumed that the electrode is at infinity.

If the Z value is left blank, then no topographic correction can be applied for calculated resistivities.

Script Parameter: IP.R2X, IP.R2Y, IP.R2Z