Selecting Holes using the Hole Selection Tool

The Hole Selection Tool enables custom selection of single or multiple holes using a dialog that displays a plan view of the drillhole project. This tool enables you to view "all holes", "selected holes" and holes including "full traces" or "labels". You can select interactively by drawing a polygon or by clicking holes individually. This method is best used if you have pre-existing knowledge of your drillholes and is an excellent way to preview the locations of your drillhole and the extents of your drillhole traces.

Select Drillholes using the Hole Selection Tool

1. On the DH-Plot menu, click Select Holes and then select Selection Tool.
   The Hole Selection Tool will appear.

2. In the Display section of the dialog, select All holes or Selected holes and select if holes include Full Traces and Hole Labels.

3. The drillhole plan view area can be modified using the Zoom In button (), the Zoom Out button () and the Zoom Data Extents button ().

4. In the Selection Tools section of the dialog you can select the Select All or Select None buttons, or depending on the Selection Mode you can Select/Deselect single holes (), Select/Deselect using rectangle tool () or Select/Deselect using polygon tool ().

5. To deselect all the holes click the Select None button.

6. Set the Selection Mode to Select and using the Select/Deselect buttons described above (single holes, rectangle tool, polygon tool), select the drillholes. Selected drillholes will be highlighted, while deselected holes will be faded, as shown below.