NARR (Draw a north arrow)

The NARR command plots a north arrow on the map.

Command Syntax:

NARR refp,xoff,yoff,direc,length,att,incl,decl

att,height,width,space,slant,font

Command Parametes:

refp	Reference point from which to refer the following offsets. The default is reference point 1.
xoff,yoff	Offsets in map units from the reference point at which to place the north arrow symbol. The default is the current att position.
direc	North direction in degrees clockwise from map Y direction. The default is 0 degrees.
length	Length of the north arrow. The default is 60 cm.
att	Attribute to use. The default is att 1.
incl	Inclination of the geomagnetic field vector. The default is not to report the inclination. The label "Inclination" can be changed to a different language by setting the desired translation in the Mapplot_Translations.csv file in your %USERPROFILE%\Documents\Geosoft\Desktop Applications \csv directory.
decl	Declination of the geomagnetic field vector. The default is not to report the declination. The label "Declination" can be changed to a different language by setting the desired translation in the Mapplot_Translations.csv file in your %USERPROFILE%\Documents\Geosoft\Desktop Applications \csv directory.

Sub-Command Parameters:

This line can be used to set the text characteristics.

att	Attribute for text. (default 1)
height	Character height. (default 7% length)
width	Character width. (default 6% length)
space	Character spacing. (default 6% length)
slant	Slant of the characters in degrees from vertical. The default is the last slant specified.
font	Text font (default is current font). Refer to the FONT command for descriptions of the available fonts.

Example

MDFF m1

NARR 3,-5,5,0,6,,"17 deg.","12 deg. W."

Draws a 6 cm north arrow 5 cm left and 5 cm above the lower right corner of the map. The geomagnetic inclination and declination are annotated.

$image\ebx_1070320473.jpg$

The labels "Inclination" and "Declination" can be changed to a different language by setting the desired translation in the Mapplot_Translations.csv file in your %USERPROFILE%\Documents\Geosoft\Desktop Applications \csv directory.

This command is part of the MAPPLOT GX.