GX Summary: Quick Description of each GX

 

A

 

ACQHOLE GX

Use the ACQHOLE GX to import drillhole information from an acQuire database through ODBC connection.

ACQPOINT GX

Use the ACQPOINT GX to import Point sample information from an acQuire database via ODBC connection.

Add ArcGIS LYR to Map GX

Use the Add ArcGIS LYR File to Map GX to add a LYR file into the current Data view of the current map or into a new map with the extents of the Data view defined by the extents of the data referenced by the LYR.

AGABSGRAV GX

Use the AGABSGRAV GX to calculate absolute gravity

AGEOTVOS GX

Use the AGEOTVOS GX to calculate Eotvos correction

AGFACOR GX

Use the AGFACOR GX to calculate free air correction.

AGFREEAIR GX

Use the AGFREEAIR GX to calculate Free-air anomaly by summing up previously calculated Vertical Acceleration, Eotvos, Tide (optional), Latitude, and Free-air corrections.

AGGGRID GX

Use the AGGGRID GX to create a Geosoft colour grid from an Aggregate.

AGIMPGPS GX

Use the AGIMPGPS GX to Import GPS data file into a new database.

AGIMPGRAV GX

Use the AGIMPGRAV GX to Import gravity data file into a new database.

AGLATCOR GX

Use the AGLATCOR GX to calculate latitude correction.

AGMERGE GX

Use the AGMERGE GX to merge GPS data into gravity database.

AGRECALC GX

Use the AGRECALC GX to recalculate gravity from raw data

AGTIDECOR GX

Use the AGTIDECOR GX to calculate earth-tide correction.

AGTOTCOR GX

Use the AGTOTCOR GX to calculate total corrected Free-air anomaly in one step.

AGVACCOR GX

Use the AGVACCOR GX to calculate Vertical Acceleration (Vacc) correction.

ANOMPICK GX

Use the ANOMPICK GX to pick anomalies from one channel or a selection of channels.

Array Channel Profile Viewer

Use the Array Channel Profile Viewer to view Array data.

ARROWS GX

Use the ARROWS GX to plot arrow vectors based on X and Y direction channels.

AVGREPXY GX

Use the AVGREPXY GX to average the values in a given channel which appear at repeating locations in a line.

B

 

BALLOON GX

Use the BALLOON GX to plot a text balloon on a map.

BANDPASS GX

Use the BANDPASS GX to apply a band-pass filter to a channel.

BASEMAP2 GX

Use the BASEMAP2 GX to define the layout for the current map surrounds. This GX is implemented as a wizard that runs several different dialogs depending on which map style layout you choose.

BGCON GX

Use the BGCON GX to create a grid using bi-directional line gridding from a BIGRID control file.

BIGRID

Use the Grid Data tool to create a new grid file using the bi-directional gridding method.

BRKLINE GX

Use the BRKLINE GX to break a line into component lines based on line numbers in a reference channel.

BSPLINE GX

Use the BSPLINE GX to calculate a B-spline interpolation of data in a channel. A B-spline allows you to control the smoothness of the spline and the tension applied to the ends of the spline.

C

 

CGMOPTIONS GX

Use CGMOPTIONS GX to set the options for exporting a map to CGM (Computer Graphics Metafile).

CHANPOFF GX

Use the CHANPOFF GX to un-protect all channels.

CHANPROT GX

Use the CHANPROT GX to protect all channels.

CHAPPEND GX

Use the CHAPPEND GX to append a working assay database to a master geochemical database.

CHATTRIB GX

Use the CHATTRIB GX is used to set ASSAY channel attributes.

CHCHATTR GX

This GX enables you to view and change attribute information associated with assay data in a Geosoft database. Information for the currently selected channel in an open database is displayed.

CHBAR GX

The CHBAR GX is used plot bar symbols that can represent 1-8 different channel values at each point. The CHBAR GX plots a bar graph where the height of each bar scales linearly with the data values. The three plots make use of virtually the same parameters, including colours and scaling factors, so they may be used one after another, with minimal need for re-definition of values.

CHBARLEG GX

Use the CHROSELEG, CHPIELEG and CHBARLEG GXs to plot a legend for the Rose, pie and bar symbol plots.

CHBOXPLOT GX

Use the CHBOXPLOT GX to create a box plot of the selected assay data

CHCHANCOLOR GX

Use the CHCHANCOLOR GX to colour channels based on percentage breaks in the data.

CHCHATTR GX

This GX allows you to view and change attribute information associated with assay data in a Geosoft database. Information for the currently selected channel in an open database is displayed.

CHCLASS GX

Use the CHCLASS GX to plot classified colour symbols on the current map. Run the GX from the Plot Classified Colour Symbols button on the Histogram Analysis tool.

CHCLEARMASK GX

Use the CHCLEARMASK GX to set all values in the Mask channel to 1.

CHCLSYMB GX

Use the CHCLSYMB GX to plot classified symbols. There are 6 dialog boxes with this GX.

CHCLSYMB2 GX

Use the CHCLSYMB2 GX to plot classified symbols, using one channel to determine the colours, and another channel to give the sizes.

CLEAREXTMASK GX

Use the CLEAREXTMASK GX to remove a group mask from a view.

CHCORREL GX

Use the CHCORREL GX to calculate the Pearson’s correlation between data channels and plot results in a correlation table on a map.

CHCREATE GX

The CHCREATE GX is run from within the CHIMPORT and CHIMPLAB GXs to create a new database file.

CHDUP GX

Use the CHDUP GX to extract duplicates from a new laboratory database and add the duplicates to the end of a duplicates database.

CHDUPREP GX

Use the CHDUPREP GX to display a graphical report of duplicate results.

CHGETATT GX

This GX allows you import ASSAY channel attribute data stored in a CSV file. This is a fast way to set channel attributes on different geochemistry databases.

CHGRPPLY GX

Use the CHGRPPLY GX to create or update a mask channel from a group inside a map.

CHIMPLAB GX

Use the first dialog box of the CHIMPLAB GX to import a single lab assay batch to a database. The data must currently be contained in an ASCII tabular file or in a supported database.

CHIMPORT GX

Import geochemical field survey data to a Geosoft database. Field survey information may be contained in a tabular ASCII file (including Excel CSV format files), an external database table, or the clipboard

CHLEVEL GX

Use the CHLEVEL GX to create a duplicate database from the current database, and level values in the ASSAY channels based on categories or classes defined in a string-type channel.

CHLIMASK GX

Use the CHLIMASK GX to create or update a mask channel based on values matched from any other channel.

CHLINE GX

Use the CHLINE GX to plot and label survey lines.

CHMASKRANGE GX

Use the CHMASKRANGE GX to set the mask channel depending on the whether values in a specified channel are within a specified range.

CHMERGE GX

Merge the information from a Survey database into an Assay database.

CHMHIST GX

Use the CHMHIST GX to make multi histogram plots on a map.

CHMSCAT GX

Use the CHMSCAT GX to make multi scatter plots on a map.

CHMPROB GX

Use the CHMPROB GX to make multi probability plots on a map.

CHNORM GX

Use the CHNORM GX to normalize one or more ASSAY class channels.

CHPCOMP GX

Use the CHPCOMP GX to perform a principal component analysis.

CHPCSYNTH GX

Use the CHPCSYNTH GX to re-synthesize a data set from a subset of its principal components.

CHPIE GX

The CHPIE GX is used to plot pie symbols, which can represent 1-8 different channel values at each point. The CHPIE GX creates Pie-plot symbols where the angle of each pie section represents the relative sizes of the different channel values.

CHPIELEG GX

Use the CHROSELEG, CHPIELEG and CHBARLEG GXs to plot a legend for the Rose, pie and bar symbol plots.

CHPOLY GX

Use the CHPOLY GX to create a mask channel based on a polygon or rectangle mask file.

CHPOST GX

Use the CHPOST GX to post a channel on a map.

CHPREFERENCES GX

Use the CHPREFERENCES GX to customize montaj Geochemistry behaviour.

CHPRHIST GX

Use the CHPRHIST GX to print a histogram plot.

CHPROF GX

Use the CHPROF GX to draw profiles of channel values for all selected lines in a database.

CHPROJ GX

Use the CHPROJ GX to edit the project information of a Geochemistry project stored in a Geosoft Database.

CHPROPSYMB GX

Use the CHPROPSYMB GX to place proportionally scaled symbols on your map.

CHPRPROB GX

Use the CHPRPROB GX to print a probability plot.

CHPRSCAT GX

Use the CHPRSCAT GX to print a scatter plot

CHPRSTAT GX

Use the CHPRSTAT GX is used to print ASSAY channel statistics to a CSV file.

CHPRTRI GX

Use the CHPRTRI GX to print a TriPlot

CHRANGECATDB GX

The CHRANGECATDB GX creates a duplicate database from the current database, and transforms the values in the ASSAY channels to integer values 0 to N, based on N input percentile values and the values’ location in the range of data for each channel.

CHREDISPLAYASSAY GX

Use the CHREDISPLAYASSAY GX to unload and reload assay channels, especially for sorting the channels alphabetically, or loading all assay channels at once.

CHROSE GX

The CHROSE GX is used to plot rose symbols, which can represent 1-8 different channel values at each point. The CHROSE GX create Rose (or Sector) plots, which are similar to Pie plots, but each section has an equal angle, but the radius of individual segments scales with the data value.

CHROSELEG GX

Use the CHROSELEG, CHPIELEG and CHBARLEG GXs to plot a legend for the Rose, pie and bar symbol plots.

CHSAVEATT GX

This GX allows you export ASSAY channel attribute data to a CSV file. This is a fast way to transfer channel attributes to different Geochemistry databases.

CHSCAT GX

Use the CHSCAT GX to plot one channel against another, and interactively interrogate the data plotted on a map and contained within the database.

CHSTAT GX

Use the CHSTAT GX to calculate the summary statistics of a selected channel.

CHSTND GX

Use the CHSTND GX to extract standards from a new laboratory database and add the standards to the end of a standards database.

CHSTNREP GX

Use the CHSTNREP to create a graphical standards report from a standards database.

CHSUBSET GX

Create a new SUBSET database from a Master database. The subset database will only include data that is not dummy in the Mask channel.

CHSYMB GX

Use the CHSUBSET GX to plot geochemical sample locations. Location plots are used to represent the spatial distribution of sample locations on a map. When you use this functionality, the system searches the currently selected database for x and y locations and plots a specified symbol on the currently selected map.

CLASSLEG GX

Use the CLASSLEG GX to place a legend describing the graduated colour symbol scheme on your map. If the CLASYMB GXCLASYMB_GX was used to create the colour symbols, use this GX to create the legend.

CLASYMB GX

Use the CLASYMB GX to plot symbols classified on data ranges.

CLASYMB2 GX

Use the CLASSIFY GX to plot classified symbols based on a classification channel prepared using CLASSIFY GX.

CLEARMASK GX

Use the CLEARMASK GX to clear the clip area in a view.

CLOSEGDB GX

Use the CLOSEGDB GX to close the current database.

CLOSEMAP GX

Use the CLOSEMAP GX to close the current map.

COLORBAR GX

Use the COLORBAR GX to create a Colour Bar of a single grid image or a colour-shaded grid image.

COLSYMB GX

Use the COLSYMB GX to place coloured symbols on your map. Symbols can be fixed size, or sized in proportion to data values.

CONTCON GX

Use the Contour from a Control File option (CONTCON GX) to draw contours on a map using a specified grid file and existing contour control file.

CONTOUR GX

Use the CONTOUR GX to draw contours on a map using a specified grid.

COPY GX

Use the COPY GX to copy one channel to another.

COPYLINE GX

Use the COPYLINE GX to copy an entire line in the database to a new line.

COPYMAP GX

Use the COPYMAP GX to copy the current map to the clipboard.

COPYMASK GX

Use the COPYMASK GX to copy one channel to another, using a mask channel to set values.

CSLEGEND GX

Use the CSLEGEND GX to place a legend describing the graduated colour symbol scheme on your map. The user must input an AGG, ITR or ZON file with the colour-value relationship.

CUSTOM MAP DIALOG

Use this dialog to create a base map from your own custom MAPPLOT control file.

D

 

DAPMAP GX

The DAPMAP GX will create a default base map for a specified latitude/longitude area.

DBACTLOG GX

Use the DBACTLOG GX to edit the comment block of a database file.

DBCLOSE GX

This GX closes all currently open maps.

DBGENABLE GX

Use the DBGENABLE GX to enable the GX debugger for all subsequent GX runs.

DBMERGE GX

Use the DBMERGE GX to merge the contents of one database into another.

DBSUBSET GX

Use the DBSUBSET GX to create a new SUBSET database from the current database.

DECIMATE GX

Use the DECIMATE GX to decimate a channel by removing values.

DELCHAN GX

Use the DELCHAN GX to delete a channel from a database.

DELLINE GX

Use the DELLINE GX to delete a line or a set of lines from a database.

DELLINES GX

Use the DELLINES GX to delete a line or group, or all selected lines and groups from a database.

DHCLEAN GX

Use the DHCLEAN GX to delete holes not registered in the collar table.

DHCLEARMASK GX

Use the DHCLEARMASK GX to initialize or re-initialize the mask channel value, or to create a new mask channel.

DHCOMPOSITEDB GX

Use the DHCOMPOSITEDB GX to create a composite database from an input From-To assay database.

DHCONVERT GX

Use the DHCONVERT GX to convert an old-style Wholeplot database into a new Drillhole project.

DHDELHOLES GX

Use the DHDELHOLES GX to delete holes from a Target Drillhole project.

DHEDITMAP GX

Use the DHEDITMAP GX to launch the appropriate tabbed dialog (Plan, Section or Strip Log) to modify parameters in a currently open Drillhole map.

DHEDRCD GX

Use the DHEDRCD GX to add or edit rock codes for a drillhole.

DHEXPCSV GX

Use the DHEXPCSV GX to export a drillhole project to Comma Separated Files (CSV).

DHEXPDB GX

Use the DHEXPDB GX to export data to a Microsoft Access database (MDB).

DHEXPORTLAS GX

Use the DHEXPORTLAS GX to export a drillhole project to a LAS version 2 file.

DHEXPSHP GX

Use the DHEXPSHP GX to export a drillhole project to ArcView 3D Shape Files (CSV).

DHEXPSURPACGD GX

Use the DHEXPSURPACGD GX to export drill-hole data to a Surpac Geological Database Microsoft Access database (MDB).

DHHOLE GX

Use the DHHOLE GX to edit drillholes in a drillhole database.

DHIMPDATAPARAM GX

Use the DHIMPDATAPARAM GX to import data plot meta-data information into a drill-hole project.

DHOPENPRJ GX

Use the DHOPENPRJ GX to select from the available drill projects in the specified directory, and load the constituent databases into the current project.

DHIMPORT GX

Use the DHIMPASC GX to import drillhole ASCII files, and the DHIMPDB GX to import XLS/Database files into a Target project. These GXs call the DHIMPORT GX.

DHIMPORTLAS GX

Use the DHIMPORTLAS GX to import LAS format files into a Geosoft drillhole project.

DHKRIGRID GX

Use the DHKRIGRID GX to set advanced options for kriging (KRIGRID) gridding algorithm.

DHLIMASK GX

Use the DHLIMASK GX to create or update a mask channel based on values matched from any channel.

DHMASKPLY GX

Use this GX to select data in a Target database, using the polygon selection tool on a plan or section map.

DHMASKRANGE GX

Use the DHMASKRANGE GX to set the mask channel depending on the whether values in a specified channel are within a specified range.

DHNEWPRJ GX

Use the DHNEWPRJ GX to create a new drillhole project and its associated Geosoft Database. This is the first step in loading drillhole data.

DHNHOLE GX

Use the DHNHOLE GX to create new drillholes in a drillhole database.

DHPLAN GX

Use the DHPLAN GX to create a plan plot of drillholes. A plan plot is a 2-D horizontal map of the drillholes over the exploration target.

DHPLSECT GX

Use the DHPLSECT GX to trace the outline of a section or sections on a plan map.

DHPREFERENCES GX

Use the DHPREFERENCES GX to customize Drillhole behaviour.

DHQAQC GX

Use the DHQAQC GX to perform Quality Control and Quality Assurance tests on drillhole databases.

DHRANGRID GX

Use the DHRANGRID GX to set advanced options for the minimum curvature (RANGRID) gridding algorithm.

DHREFRESH GX

Use the DHREFRESH GX to refresh the constituent drill project databases from the original data sources.

DHSECT GX

Create one or more cross-section plots of drillhole data. A cross-section plot is a slice of the ground, which is normally vertical but may also swing away from the vertical. Section plots display both drill-hole traces and observation data in a variety of formats, including simple postings, profiles, bar plots and colour or patterned bands.

DHSELCOLLAR GX

Use the DHSELCOLLAR GX to select holes based on values in a channel in the collar table.

DHSLAREA GX

Use the DHSLAREA GX to select holes based on area on a plan map.

DHSELECTPLY GX

Use the DHSELECTPLY GX to select holes based on an area described in a polygon file.

DHSLLOAD GX

Use the DHSLLOAD GX to load hole selections from a selection file.

DHSLNAME GX

Use the DHSLNAME GX to select holes by name with wild-card characters.

DHSLSAVE GX

Use the DHSLSAVE GX to save current hole selections to a selection file.

DHSTRUCTCODES GX

Use the DHSTRUCTCODES GX to add to or edit a structure codes file.

DHSUBSETPROJ GX

Use the DHSUBSETPROJ GX to export a subset of a drillhole project to a new drillhole project.

DIFF GX

Use the DIFF GX to calculate differences between values in a channel.

DIGIT GX

Use the DIGIT GX to digitise points from a map and place them in an ASCII XYZ file.

DIGITPROFOPT GX

Use the DIGITPROFOPT GX to view or alter the current settings for Targets list, output channel and symbols.

DISTCHAN GX

Use the DISTCHAN GX to calculate a distance channel from provided X and Y channels. The first point on each line is at distance 0 and subsequent points are calculated from the cumulative distance down the line.

DISTFID GX

Use the DISTFID GX to create a distance-based channel from a fiducial-based channel.

DMPLOTPOLY GX

Use the DataMine GX to plot DataMine polygons to Drillhole Sections for editing.

DUMREP GX

Use the DUMREP GX to convert repeating values in a channel to dummies.

DUPMAP GX

Use the DUPMAP GX to create a duplicate copy of current map.

E

 

E3ANEULER GX

Use the E3ANEULER GX to apply An-Eul method to determine the source depths and structural indexes of a list of anomaly locations in the current database.

E3ASIG GX

Use the E3ASIG GX to compute the analytic signal grid from existing derivative grids.

E3DECON GX

Use the E3DECON GX to apply Euler depth deconvolution as a tool for potential field interpretation.

E3MGRGRD GX

Use the E3MGRGRD GX to create a gravity or total field magnetic grid (.GRD) file using the minimum curvature gridding method.

E3PEAKS GX

Use the E3PEAKS GX to automatically select solution picks from a grid.

E3PREP GX

Use the E3PREP GX to compute x, y, and z derivatives of an input grid. This is a necessary first step in Euler deconvolution.

E3SUBSET GX

Use the E3UBSET GX to copy a subset of the solutions list to a new solutions list.

E3WINDCL GX

Use the E3WINDCL GX to clear (deselect) all results from the database created by E3DECON GX

E3WINDOW GX

Use the E3WINDOW GX to remove certain solutions if they exceed acceptable limits of depth, weight, or other parameters.

E3WINDRS GX

Use the E3WINDRS GX to select all solutions to plot from the database created by E3DECON GX

E3XYEULER GX

Use the E3XYEULER GX to apply Euler depth deconvolution as a tool for potential field interpretation.

EDIT GX

Use the EDIT GX to launch a Windows editor to edit an ASCII file.

EDITLINE GX

Use the EDITLINE GX to edit line information for all selected lines. This is useful for changing line types, flight numbers or dates for a group of lines in a database.

EXPASEG GX

Use the EXPASEG GX to export data to a ASEG-GDF format with full support of projection. Either displayed data channels or all data channels may be exported, and the displayed line, selected lines or all lines may be exported. If the output file(s) already exist, they will be overwritten.

EXPDATAMINESTR GX

Use the EXPDATAMINESTR GX to export selected map group line work to a Datamine string (*.dm) file.

EXPDB GX

Use the EXPDB GX to export data to a Microsoft Access database (MDB).

EXPDXF3D GX

Use the EXPDXF3D GX to export selected map groups to a 3D DXF file.

EXPGBN GX

Use the EXPGBN GX to export data to a Microsoft Access database (MDB). Either displayed data channels or all data channels may be exported, and the displayed line, selected lines or all lines may be exported. If the output file(s) already exist, they will be overwritten.

EXPGEN GX

Use the EXPGEN GX to export data to several formats. Either displayed data channels or all data channels may be exported, and the displayed line, selected lines or all lines may be exported. If the output file(s) already exist, they will be overwritten.

EXPMAP GX

This GX exports a map to a bitmap or external plot file.

EXPORT GX

Use the EXPORT GX to export data to a Geosoft XYZ file.

EXPSHP GX

Use the EXPSHP GX to export a GDB database to a shape file (or files)

EXPSURPACSTR GX

Use the EXPSURPACSTR GX to export selected map group line work to a Surpac STR file

EXPUBCVOX GX

Use the EXPUBCVOX GX to export a Geosoft Voxel to a UBC Mesh/Mod file.

EXPXYZVOX GX

Use the EXPXYZVOX GX to export a Geosoft Voxel to an XYZ file.

F

 

FFT1MULT GX

Use the FFT1MULT GX to apply multiple 1D Fast-Fourier Transform filters to a channel.

FFT2FLT GX

Use the FFT2FLT GX to apply filters to an FFT2D image and inverse FFT2D back.

FFT2IN GX

Use the FFT2IN GX to apply a Fast-Fourier Transform to an image.

FFT2PREP GX

Use the FFT2PREP GX to prepare your grid for FFT processing.

FFT2PSPC GX

Use the FFT2PSPC GX to calculate power spectrum of an FFT2 Transform image.

FFT2RSPC GX

Use the FFT2RSPC GX to calculate radially averaged power spectrum of an FFT2 Transform image.

FFT2SMAP GX

Use the FFT2SMAP GX to create a spectrum profile map from spc file generated by fft2D (magmap).

FFTAS GX

Use the FFTAS GX to calculate the Analytic Signal of a potential field (magnetic or gravity) profile.

FFTBANDP GX

Use the FFTBANDP GX to apply a Fast-Fourier Transform Band-Pass filter to a channel.

FFTBUTTW GX

Use the FFTBUTTW GX to apply a Fast-Fourier Transform Butterworth filter to a channel.

FFTCONT GX

Use the FFTCONT GX to apply a Fast-Fourier Transform Continuation filter to a channel.

FFTCOSN GX

Use the FFTCOSN GX to apply a Fast-Fourier Transform Cosine Roll-off filter to a channel.

FFTDENS GX

Use the FFTDENS GX to apply a Fast-Fourier Transform Apparent Density filter to a channel.

FFTGAUSS GX

Use the FFTGAUSS GX to apply a Fast-Fourier Transform Gaussian filter to a channel.

FFTHIGHP GX

Use the FFTHIGHP GX to apply a Fast-Fourier Transform High-Pass filter to a channel.

FFTHZDRV GX

Use the FFTHZDRV GX to apply a Fast-Fourier Transform Horizontal Derivative filter to a channel.

FFTHZINT GX

Use the FFTHZINT GX to apply a Fast-Fourier Transform Horizontal Integration filter to a channel.

FFTIN GX

Use the FFTIN GX to transform a channel from the space domain to the frequency domain. Three output channels are created. They will have the same name as the input channel but extension "_r" and "_i" for real and imaginary components of the transform, and "_w" for the wavenumber in radians/fiducial.

FFTLOWP GX

Use the FFTLOWP GX to apply a Fast-Fourier Transform Low-Pass filter to a channel.

FFTOUT GX

Use the FFTOUT GX to transform from the frequency domain to the space domain.

FFTPREP GX

Use the FFTPREP GX to apply FFT pre-processing procedures to a channel so that the pre-processed channel may be visually inspected.

FFTPSPEC GX

Use the FFTPSPEC GX to calculate the log power spectrum of a channel.

FFTRPOLE GX

Use the FFTRPOLE GX to apply a Fast-Fourier Transform Reduction to the Magnetic Pole filter to a channel.

FFTSAMP GX

Use the FFTSAMP GX to set channel data sampling parameters for 1-D FFT.

FFTSUSC GX

Use the FFTSUSC GX to apply a Fast-Fourier Transform Apparent Susceptibility filter to a channel.

FFTVDRV GX

Use the FFTVDRV GX to apply a Fast-Fourier Transform Vertical Derivative filter to a channel.

FFTVINT GX

Use the FFTVINT GX to apply a Fast-Fourier Transform Vertical Integration filter to a channel.

FIGHELP

Use this dialog to create a figure map style base map.

FILEPRNT GX

This GX prints one or more files

FILTER GX

Use the FILTER GX to apply a convolution filter to a channel. The filter can be defined in a filter file or in a comma delimited string.

FULLLEV GX

Use the FULLEV GX to adjust the values of an input channel by adding a correction defined in a error channel. The correction is linearly interpolated between defined values.

G

 

GBN GX

Use the GBN GX to import Geosoft Binary Format data.

GEO32 GX

Use the GEO32 GX to run a process, such as an executable file (*.exe) or a batch file (*.bat).

GPFCMNT GX

Use the GPFCMNT GX to edit the comment block of a Geosoft Project (*.GPF) file.

GPSGAP GX

Use the GPSGAP GX to fill gaps in differential GPS channels by interpolating the raw GPS data within those gaps.

GPSLOAD GX

Use the GPSLOAD GX to load differential GPS locations from a Geosoft ASCII table into differential positioning channels of the database. The differential correction data must be contained in a Geosoft Table File that contains at least Date, Time, X, Y and Alt fields.

GRAPPEND GX

Use the GRAPPEND GX to append a single gravity survey database to a master gravity database.

GRBASEDB GX

The GRBASE GX will open or create a base station database that will be used with the current survey project. A base station database contains the absolute gravity and longitude/latitude locations of established gravity base stations that will be used for the current gravity project.

GRCALFILE GX

Use the GRCALFILE GX to create a calibration table file from an existing calibration data file that is in some other format.

GRCALIB GX

Use the GRCALIB GX to create a calibration table from a calibration survey database.

GRCG3 GX

Use the GRCG3 GX to convert a CG3 instrument dump file to a RAW format file.

GRDNLCG3 GX

Use this GX to download a GG-3 instrument over the serial port of your computer.

GRDRIFT GX

Use the GRDRIFT GX to carry out the following components of a gravity reduction:

GRID2ARRAYGDB GX

Use the GRID2ARRAYGDB GX to import grid data into a new or existing database.

GRID2PLY GX

You can use the Grid Outline option (GRID2PLY GX) to find edge points in a grid image and either save the edges in a polygon file or draw the edges on the current map.

GRIDADD GX

Use the GRID2PLY GX to find edge points in a grid image and either save the edges in a polygon file or draw the edges on the current map.

GRIDAGC GX

Use the GRIDAGC GX to apply automatic gain compensation to a grid. After isolating signal and background components in the input grid for a given window size, a correction is applied to the signal component in order to equalize its amplitude over the grid.

GRIDASIG GX

The GRIDASIG GX calculates the analytic signal of a grid.

GRIDBASE GX

Use the GRIDBASE GX to subtract a base level from a grid.

GRIDBOOL GX

Use the GRIDBOOL GX to mask one grid against another to produce a new output grid.

GRIDCALC GX

Use the GRIDCALC GX to apply an expression to grid files. Expressions work on a grid point-by-point basis.

GRIDCOPY GX

Use the CopyConvertMultiGrids GX to copy or convert grids.

GRIDFILL GX

Use the GRIDFILL GX to interpolate a grid to fill all dummy areas.

GRIDFILT GX

Use the GRIDFILT GX to apply a 9-point filter to a grid using any number of passes.

GRIDFLTN GX

Use the GRIDFLTN GX to apply a NxN ( N = 5, 7 or 9 ) symmetric filter to a grid using any number of passes.

GRIDFLT5 GX

Use the GRIDFLT5 GX to apply a 5x5 symmetric filter to a grid using any number of passes.

GRIDGDB GX

Use the GRIDGDB GX to import grid data into new or existing databases.

GRIDGRAD GX

Use the GRIDGRAD GX to calculate the grid gradient amplitude, or in a specified direction.

GRIDHIST GX

Use the GRIDHIST GX to plot a grid histogram.

GRIDIMG1 GX

Use the GRIDIMG1 GX to place a single grid image on a map.

GRIDIMG2 GX

Use the GRIDIMG2 GX to place an aggregate of 2 grid images on a map.

GRIDIMG3 GX

Use the GRIDIMG3 GX to place an aggregate of 3 grid images on a map.

GRIDIMG3D GX

Use the GRIDIMG3D GX to place a single grid image on a map.

GRIDIMG4 GX

Use the GRIDIMG4 GX to place an aggregate of 4 grid images on a map.

GRIDIMGS GX

Use the GRIDIMGS GX to place a colour-shaded grid image on a map.

GRIDIMGT GX

Use the GRIDIMGT GX to place a ternary colour image on the map. A ternary colour image maps each primary colours to the amplitudes of a single input grid. The user may choose the the cyan-magenta-yellow model (CMY), the red-green-blue model (RGB).

GRIDKNITPATH GX

Use the GRIDKNITPATH GX to plot the grid suture path on a map.

GRIDMASK GX

Use the GRIDMASK GX to create a Mask Grid file using polygon coordinates defined in a separate file. The polygon coordinates reference the input grid file. The region of the input grid file inside (or outside) the polygon is masked out - i.e. replaced by dummies.

GRIDMUL2 GX

Use the GRIDMUL2 GX to multiply two grids together.

GRIDMULT GX

Use the GRIDMULT GX to multiply a grid by a constant.

GRIDPEAK GX

Use the GRIDPEAK GX to find peaks in a grid file.

GRIDPROF GX

Use the GRIDPROF GX to extract a data profile from a grid and place it in a new line of the current database.

GRIDRAT GX

Use the GRIDRAT GX to compute the ratio of two grids.

GRIDREPJ GX

Given an existing grid file in a defined map projection, you can use the GRIDREPJ GX to create a new grid file in a different map projection. The GX is implemented as a Wizard that has 5 steps:

GRIDSAMP GX

Use the GRIDSAMP GX to sample a grid at specified X,Y locations and create a new channel that contains the sampled grid data.

GRIDSECTION GX

Use the GRIDSECTION GX to create a grid from section data stored in a single line.

GRIDSHAD GX

Use the GRIDSHAD GX to create a shaded relief image from a grid.

GRIDSTAT GX

Use the GRIDSTAT GX to report and modify information about a grid, including simple statistical information and coordinate system information.

GRIDSTCH GX

Use the GRIDSTCH GX to stitch together two grids into a single grid.

GRIDSTCH1 (Trend Removal)

Use this dialog to specify trend removal options.

GRIDSTCHR (Regional trend removal)

Use this dialog to specify regional trend removal options.

GRIDSTCH2 (Interpolation options)

Use this dialog to specify interpolation options.

GRIDSTCH3 (Suture options)

Use this dialog to specify suture options.

GRIDSUB GX

Use the GRIDSUB GX to subtract one grid from another.

GRIDTRND GX

Use the GRIDTRND GX to remove a Trend Surface from a Grid

GRIDTRNS GX

Use the GRIDTRNS GX to transpose a grid by swapping the grid rows with the grid columns.

GRIDVALUE GX

Use the GRIDVALUE GX reports the grid value at a selected location from up to four grid files.

GRIDVD GX

Use GRIDVD GX to apply vertical derivative convolution filter to a grid.

GRIDVOL GX

Use the GRIDVOL GX to calculate the volume of space defined by a grid surface, above and below a base of reference.

GRIDWIND GX

Use the GRIDWIND GX to create a Grid from a rectangular mask in a larger Grid (up to 16,000 x 16,000).

GRIDXPND GX

Use the GRIDXPND GX to expand a grid by adding dummies to the new expanded region beyond the edges of the old grid. This is designed mainly to provide a bordering area to be filled by GRIDFILL in preparation for MAGMAP.

GRIDZONE GX

Use the GRIDZONE GX to create a colour zone file from statistics compiled from up to 5 grids.

GRLDBASE GX

Base station data can be loaded/imported into the base station database either from an existing Geosoft Database or from a comma delimited text file that contains base station information. Each base station will have the following information

GRLDXYE GX

Location data can be loaded/imported into the location database either from an existing Geosoft Database or from a comma delimited text file that contains location information. Each location will have the following channel

GRLL2XY GX

The GRLL2XY GX will convert longitude/latitude coordinates to X/Y coordinates on a projected map or local coordinate system.

GRLOAD GX

Merge the location data from a location database into a gravity survey database.

GRMGXYE GX

Merge the location data from a location database into a gravity survey database.

GROUPAREA GX

Calculate the polygonal area of all polygons contained in a map group.

GROUPPLY GX

Use the GRREGTER GX to create a regional terrain correction grid for a survey. A regional terrain correction grid is calculated over a survey area based on a regional Digital Elevation Model (DEM) and at the resolution of a local, more detailed DEM.

GRPARM GX

Use the GRPARM GX to enables you to view and modify the gravity project parameters.

GRPROJ GX

Use the DHPROJ GX to edit the project information of a drillhole project stored in a Geosoft Database.

GRREGTER GX

Use the GRREGTER GX to create a regional terrain correction grid for a survey. A regional terrain correction grid is calculated over a survey area based on a regional Digital Elevation Model (DEM) and at the resolution of a local, more detailed DEM.

GRREPEAT GX

The GRREPEAT GX will find all repeat readings in the master database based on the Station number, or combined Line and Station number. It calculates averaged values and displays repeat statistics for the survey. Repeat statistics can also be reviewed in a text report file.

GRTERAIN GX

Use GRTERAIN GX to calculate terrain corrections. The terrain correction results will be placed in the Output Terrain Correction Channel (by default "Terrain" channel).

GRUKOA GX

Use the GRUKOA GX to load location information from a UKOA file into a gravity database.

GRXY2LL GX

The GRXY2LL GX will convert projected map or local coordinate system X/Y coordinates to longitude/latitude.

GRXYEDB GX

The surveying of gravity station locations is often carried out separately from the gravity survey. This GX will allow you to create a location database that contains the gravity survey locations alone. The locations can be merged with the raw survey data as part of the drift correction, or they can be merged into any database that contains a "Station" channel. The location database can also be used to create maps to show the planned locations of gravity stations before or during the collection of gravity readings.

GSRUN GX

Use the GSRUN GX to run a script from the Oasis montaj interface.

GSTSTAT GX

Use the GSTSTAT GX to calculate the summary statistics of a selected channel.

GXRUN GX

Use the GXRUN GX to run another GX.

H

 

HEADING GX

Use the HEADING GX to apply a heading correction to data for a systematic shift (in the data) that is a function of the direction of travel for a survey line.

HGDIMG GX

The HGDIMG GX will create a hypergrid (HGD) file from a large grid or image file.

HGDMOSAIC GX

The HGDMOSAIC GX will create a hypergrid (HGD) file from a set of grids that together make up a mosaic of a larger area.

HIGHPASS GX

Use the HIGHPASS GX to apply a high-pass (sharpening) filter to a channel.

HILBERT GX

Use the HILBERT GX to do Hilbert transform for a channel by means of FFT.

HXYZGDB GX

The HXYZGDB GX is used to create an HXYZ (HyperXYZ ) database from a Geosoft random point database. This point format was designed as an optimized read-only format for DAP servers and supports compression, fast windowing and multithreading.

HXYZSQL GX

The HXYZSQL GX will create a HXYZ (HyperXYZ) file from a SQL database query.

I

 

IGRF GX

Use the IGRF GX to compute the IGRF or DGRF field strength, inclination and declination from given longitude, latitude and optional elevation channels. The line date is used as the model date.

IGRFPT GX

Use the IGRFPT GX to calculate IGRF and DGRF model values for a single point at a specified date.

IMGORIENT GX

The IMGORIENT3D GX lets you set up or modify the orientation of a grid in 3D space.

IMPAMIRA GX

Use the IMPAMIRA GX to import an AMIRA file into a Geosoft Database.

IMPARC GX

Use the IMPARC GX to import record formatted ASCII data into an Oasis montaj™ database. IMPARC requires a template file that describes the format of the ASCII data. ASCII data may be fixed-field formatted, or free-format delimited by commas or white space.

Import ASCII

Use the Import ASCII File GX to import ASCII data files into the current database or a new database.

IMPASEG GX

Use the IMPASEG GX to import ASEG-GDF data.

IMPDB GX

Geosoft’s database table import assumes that the database is a Microsoft Access database (with a .mdb file type). If it is not, the system prompts you for a database type (any of the following):

IMPDB2 GX

Use the IMPDB2 GX to import all tables in an external database into a database as lines.

IMPDBVOX GX

Use the IMPDBVOX GX to import a voxel from the current Geosoft Database.

IMPGOCADVOX GX

Use the IMPGOCADVOX GX to import GOCAD Voxet files to a Geosoft Voxel.

IMPMAXPLATE GX

Use the IMPMAXPLATE GX to import a Maxwell Plate model description file into a 3D map.

IMPODBC GX

Use the IMPODBC GX to import external ODBC database tables into a database.

IMPODDF GX

Import ODDF Express Data dialog options

Import GOCAD Surface

Use the Import GOCAD Surface GX to plot a GOCAD surface it to a map.

Import Geosoft XYZ

Use the Import XYZ File GX to import Geosoft formal XYZ files into a database.

IMPORTARC GX

Use the IMPORTARC GX to import an ArcView_ Shape file into Oasis montaj_. The "attribute" data is stored to the current database, while the geographic information is written to the current map.

IMPORTBB GX

Use the IMPORTBB GX to import blocked binary data into an Oasis montaj™ database. This can also be used to import RMS data.

IMPORTDGN GX

Use the IMPORTDGN GX to import a Microstation DGN file into Oasis montaj.

IMPORTDXF3D GX

Use the IMPORTDXF3D GX to import an AutoCAD DXF file into a 3D view.

IMPORTMI GX

Use the IMPORTMI GX to import a MapInfo TAB file into Oasis montaj_. The "attribute" data is stored to the current database, while the geographic information is written to the current map.

IMPOST GX

Use the IMPOST GX to import USGS POST files.

IMPSURPAC GX

Use the IMPSURPAC GX to import a Surpac STR or DTM file into an Oasis montaj map.

IMPUBCMODMSH GX

Use the IMPUBCMODMSH GX to UBC 3D Model & MSH files to a Geosoft Database.

IMPUBCVOX GX

Use the IMPUBCVOX GX to import UBC 3D Model & MSH files to a Geosoft Voxel.

IMPXYZVOX GX

Use the IMPXYZVOX GX to import a Voxel from an XYZ file.

Interactive MAGMAP Filter Design

Use the Interactive MAGMAP Filter Design to display a radially averaged power spectrum of an FFT2 Transform image, a selected filter profile and the resultant (filtered) power spectrum profile and to interactively preview the original and filtered grids.

INTERP GX

Use the INTERP GX to replace all dummies in a channel by linear, cubic spline or max. entropy prediction interpolation.

INTERSCT GX

Use the Levelling Intersections GX NET to create an intersection table.

IP3DVIEW GX

The IP3DVIEW GX will either create a new 3D View on a map from existing pseudo-sections plotted on an IP map.

IPCLEARMASK GX

Use the IPCLEARMASK GX to set all values in the Mask channel to 1.

IPDUP GX

Use the IPDUP GX to average duplicate samples in a database.

IPEXPIPDATA GX

Use the IPEXPIPDATA GX to export lines from the current database to Geosoft IPDATA files.

IPEXPIPRED GX

Use the IPEXPRESIX GX to export lines from the current database to Interpex I2X format files.

IPEXPRESIX GX

Use the IPEXPRESIX GX to export lines from the current database to Interpex I2X format files.

IPIMPGRID GX

Use the IPIMPGRID GX to import data from a grid file.

IPEXPSGDF GX

Use the IPEXPSGDFGX to export lines from the current database to a Scintrex Geophysical Data Format (SGDF) file.

IPGRIDN GX

Use the IPGRIDN GX to subset an IP database, based on "N" value, then to grid and display the grid to a new map.

IPIMP1RESIX GX

Use IPIMP1RESIX GX to import data from a single Interpex I2X format file to a specified line.

IPIMPORT GX

Use the IPIMPORT GX to import IP file data into a database.

IPIMPORT1

Use this dialog box to import IP data from an instrument dump file.

IPIMPORT2

Import IP data from a Geosoft IPDATA format file.

IPIMPORT 2A

Import IP data from a Geosoft IPRED format file.

IPIMPORT 3

Use this dialog box to import IP data from a Scintrex Geophysical Data Format (SGDF) file.

IPIMPORT 4

Use this dialog box to import IP data from a Zonge FLD file.

IPIMPORT 4A

Use this dialog box to input a scaling factor to convert station number to line position.

IPIMPORT 5

Import IP data from a Zonge AVG file.

IPIMPORT 6

Use this dialog box to specify parameters not explicitly set in a dump file.

IPIMPORT 13

Specify parameters not explicitly set in a dump file.

IPIMPRESIX GX

Use the IPIMPGRID GX to import data from a grid file.

IPLINENUM GX

Use the IPLINENUM GX to alter the internally stored IP line number. (Special Utility).

IPLNINFO GX

Use the IPLNINFO GX to set distant electrode parameters for the current line in the database. This GX is sensitive to the array type (i.e. Dipole-Dipole, Pole-Dipole, Pole-Pole and Gradient) and displays for adjustment only the relevant parameters for each type.

IPPSPLOT GX

Use the IPPSPLOT GX to plot one or more pseudo-section maps or grid sections. Map names are constructed from the line number and the channel specified in the control file; e.g. L1000_IP_Avg.map.

IPPSSTAK GX

Use the IPPSSTAK GX to plot a stacked pseudo-section map, including sections from the selected lines, plotted on a plan map.

IPQC GX

Use the IPQC GX to perform quality-control operations on "raw" samples in the current IP database.

IPRESIXZONGE 1

Use the IPRESIXZONGE 1 to set parameters for the Interpex RESIX IP2DI image inversion. For a description of individual parameters, consult the RESIX IP2DI manual.

IPRESIXZONGE GX

Use the IPRESIXZONGE GX to process and invert channels of data using the Interpex RESIX IP2DI program.

IPSETUP GX

Use the IPSETUP GX to set default values for the IP System. Some parameters, such as the positions of distant electrodes, may not be found in instrument dump files, and may be initialized here.

IPSETUP 2A

Use this dialog box to setup parameters for a Dipole-Dipole survey.

IPSETUP 2B

Use this dialog box to setup parameters for a Pole-Dipole survey.

IPSETUP 2C

Use this dialog box to setup parameters for a Pole-Pole survey.

IPSETUP 2D

Use this dialog box to setup parameters for a Gradient survey.

IPSETUP 3

Some channels contain data input from an instrument or data file. Others, such as the X and Y positions, or calculated resistivity values, are derived from the input data. These parameter control the calculation of the derived values.

IPSETUP 4

Use this dialog box to set-up Map Annotations parameters.

IPSTAKCON GX

Use the IPSTAKCON GX create a control file for plotting the stacked pseudo-section maps. This GX is normally called from the IPPSSTAK GX.

IPTOPOFILE GX

Use the IPTOPOFILE GX to import topography information from an ASCII file.

IPTOPOGRID GX

Use the IPTOPOGRID GX to import topography information from a grid file.

IPWINDOW GX

Use the IPWINDOW GX to create a new channel of IP values using one or more of the time window or frequency values in an array channel.

IPXY GX

Use the IPXY GX to create a new XY database. Note that this GX has two different behaviours, depending on the value of the input value "N".

J

 

K

 

KGCON GX

Use the KGCON GX to create a minimum curvature grid using a KRIGRID control file.

KRIGRID

Use the Grid Data tool to create a new grid file using the kriging gridding method.

L

 

LAG GX

Use the LAG GX to apply a lag correction to a channel of data by shifting the start fiducial by a specified lag amount.

LDALLCH GX

Use the LDALLCH GX to load all database channels on the current line.

LEVEL GX

Use the LEVEL GX to adjust the values of an input channel so that they match the values of a given control channel wherever the control channel values are defined (not dummy).

LINECHAN GX

Use the LINECHAN GX to create a line number channel.

LINETYPECHAN GX

Use the LINETYPECHAN GX to set the line types of database lines based on values in a particular channel.

LISTEDIT GX

The LISTEDIT GX is normally called by another GX to add or delete items from an application list. Lists are simply a list of names that are associated with a feature in Oasis montaj.

LL2XY GX

The LL2XY GX will convert longitude/latitude coordinates on to X,Y coordinates on a local coordinate system.

LOADCHAN GX

Use the LOADCHAN GX to load a channel into the spreadsheet.

LOADDBVU GX

Use the LOADDBVU GX to loads a previously saved view to the currently active database editor.

LOADPLOT GX

Use the LOADPLOT GX to add an existing Geosoft Plot file to a map

LOGCONT GX

Use the LOGCONT GX to draw contours on a map using a specified grid in logarithmic mode.

LOOKUP1 GX

Use the LOOKUP1 GX to Lookup values from a Geosoft table based on a single reference channel.

LOOKUP2 GX

Use the LOOKUP2 GX to lookup values from a Geosoft table based on a two index lookup using two input channels. The primary index channel must match the primary table field exactly. The secondary index channel is used to find a value in the secondary field of the table. Note that the ‘/=’ lines at the top of the lookup table are necessary as they are part of the Geosoft Table format. You cannot have more than the exact number of columns in a lookup table since each field defined by ‘/=’ is related to each column in sequential order.

LOOKUPDBCH GX

Use the LOOKUPDBCH GX to set the contents of a channel in one database based on a table lookup of values in a second database, using a reference channel.

LOWPASS GX

Use the LOWPASS GX to apply a low-pass (smoothing) filter to a channel.

LVCORR GX

Adds a level correction channel to a raw data channel to produce a new levelled channel. The level correction channels can be created using LVSHIFT, LVTILT, LVSPLN or LVTSPLN.

LVSHIFT GX

Use the LVSHIFT GX to create a level shift correction channel from an error difference channel. The correction is calculated as the average of the level errors (differences) at each crossing.

LVSPL GX

Use the LVSPLN GX to create a smooth splined level correction channel from an error difference channel. The correction is calculated by passing a spline function through the error points.

LVTILT GX

Use the LVTILT GX to create a tilt level correction channel from an error difference channel. The correction is calculated as the first order trend through the level errors (differences) at each crossing.

LVTSPLN GX

Use the LVTSPLN GX to create a smooth (B-splined) level correction channel.

M

 

MAGBASE GX

Use the MAGBASE GX to apply a magnetic base station correction to a magnetic channel.

MAGMAP Filtering

Use the MAGMAP Filtering GX to to apply common Fourier domain filters to gridded data.

MAKEFID GX

Use the MAKEFID GX to create a fiducial channel based on a specified reference channel. The reference channel is used to determine a start fiducial, fiducial increment, and number of elements to create.

MAPCLOSE GX

Use the MAPCLOSE GX to close all open maps in the project.

MAPCMNT GX

Use the MAPCMNT GX to edit the comment block of a map file.

MAPPLOT GX

Use the MAPPLOT GX to process a MAPPLOT control file and draw the result on the current map.

MAPPLOT Translation

MAPPLOT supports word translations to different languages for various words used in MAPPLOT.

MAPPRINT GX

Use the MAPPRINT GX to print one or more maps to the default printer.

MAPSNAP GX

Use the MAPSNAP GX to set the resolution for the SNAP function in millimeters for the current map.

MAPTMPL GX

Use the MAPTMPL GX to select/modify a map template.

MAPTMPL2 GX

Use this dialog box to create a new map template based on an existing default formats.

MARK2XYZ GX

Use the MARK2XYZ GX to extract the currently marked data in an open Oasis montaj™ database and places the data in an XYZ file. All channels currently displayed are extracted and placed in the file.

MASKCPCH GX

Use the MASKCPCH GX to copy one channel to another against mask channel.

MATH GX

Use the MATH GX to apply a mathematical expression to channels in a database.

MATHFILE GX

Use the MATHFILE GX to apply a mathematical expression to channels in a database. The expression is defined in an expression file.

MERGLINE GX

Use the MERGLINE GX to merge two lines into one by concatenating (merging) the channels.

Edit Metadata GX

Use the Edit Metadata dialog to edit the metadata associated with the selected file.

View Metadata GX

Use the View Metadata dialog to view the metadata associated with the selected file.

MOSAIC GX

The MOSAIC GX will create a single grid from a mosaic of input grids.

N

 

NewGDB GX

Use the NewGDB GX to create a new Geosoft Database (*.GDB) file.

NEWCHAN GX

Use the NEWCHAN GX to create a New channel in a database.

NEWEDIT_GX

Use the NEWEDIT GX to select the text file editor that you would like to use to view and modify ASCII text files under Oasis montaj.

NEWFID GX

Use the NEWFID GX to change the fiducial numbering of a channel.

NEWGROUP GX

Use the NEWGROUP GX to create a new group on a map.

NEWLINE GX

Use the NEWLINE GX to create a New line in a database.

NEWMAP GX

Use the NEWMAP GX to create a new blank map to fit the data range specified. The data range can be entered manually, or it can be determined from the range of selected projected data in a database or from the area covered by a grid with a projected coordinate system.

NEWMAPLL GX

Use the NEWMAPLL GX to create a new blank projected map to fit the range of latitudes and longitudes specified. The projected base map created from a latitude-longitude range will be windowed based on lines of latitude and longitude, not X and Y, and the data window will be oriented to make North up at the center of the map.

NEWXY GX

The NEWXY GX will allow you to create a pair of new projected coordinate channels from an existing pair of projected coordinate channels. You may also convert elevations from one projection to another. The GX is implemented as a Wizard that has 4 steps:

NLFILT GX

Use the NLFILT GX to apply a non-linear filter to a channel. Non-linear filters are very good for removing high amplitude and short wavelength noise from data. A non-linear filter can be followed by a linear low-pass filter to smooth any low-amplitude noise that may remain.

O

 

P

 

PATH GX

Use the PATH GX to plot and label survey line paths.

PICODAS GX

Use the PICODAS GX to import binary Picodas data from the PDAS acquisition system.

PLOTPROFILE GX

Create a figure from the displayed profiles in the current database.

POLYDEF GX

The POLYDEF GX allows you to create a new polygon file or add polygons to an existing polygon file. Polygon files are used in a number of GX’s for purposes such as masking and area selections.

POLYDRAW GX

The POLYDRAW GX draws the polygons from a polygon file on the map.

POLYGEO GX

Use the POLYGEO GX to create a map polygon mask file based on latitude, longitude map limits. The defined polygon will be converted to projected map coordinates, and the longitude, latitude outline will be sampled at a specified number of points. This file can then be used to clip data or grid files, or it can be applied to a view to clip graphics in a map.

POLYGEN GX

Use the POLYGEN GX to add a polygonal area group to a line interpretation group. This is intended for drawing interpretations on a map. A line group is first drawn to mark the location of interpreted faults and contacts. The polygonal group added to this line group will then contain the polygonal areas enclosed by all the lines.

POLYMASK GX

Use the POLYMASK GX to mask a channel in the database against one or more polygons defined in a polygon file. Data points inside or outside the polygons will be dummied in the reference channel.

POST GX

Use the POST GX to post a channel’s data values on a map.

PROFILE GX

Use the PROFILE GX to draw profiles of channel values for all selected lines in a database.

PROPSYMB GX

Use the PROPSYMB GX to place proportionally scaled symbols on your map.

PROPSYMBLEG GX

Use the PROPSYMBLEG GX to place a legend describing the proportional symbol scheme on your map.

PSEUDO-SECTION Dialogs

Use the pseudo-section tabbed dialog to select parameters for plotting pseudo-sections.

Q

 

QCDENSTY GX

Use the QCDENSTY GX to determine if the sample spacing is above or below a given threshold.

QCDEVMAP GX

Use the QCDEVMAP GX to display quality control (QC) results in the current or a new map.

QCDIURNL GX

Use the QCDIURNL GX to carry out quality control on magnetic diurnal variations during a survey.

QCEXTSTATS GX

Use the QCEXTSTATS GX to produce a statistics summary report of a selected list of channels of all selected lines. This replaces the old QCSTATS GX.

QCHEIGHT GX

Use the QCHEIGHT GX to carry out quality control on survey flying height.

QCINTERSECT GX

Use the QCINTERSECT GX to carry out quality control on data values measured at the intersection of flight and tie lines.

QCNOISE GX

Use the QCNOISE GX to calculate the fourth differences between values in a channel.

QCPATH GX

Use the QCPATH GX to carry out quality control on airplane flight path.

QCPLAMAP GX

Use the QCPLAMAP GX to display the survey plan generated by QCPLAN GX either in the current map or a new map.

QCPLAN GX

Use the QCPLAN GX to create a flight path survey plan. Given the line spacing, line azimuth (direction) and optionally a single reference point from which to start, the GX will determine the start and end positions of all the lines required to fill the area within the boundary .ply file. Results can be saved in a newly created database or an existing one.

QCSEP GX

Use the LineSeparation GX.NET to carry out quality control on flight line separations.

R

 

RANGRID

Use the Grid Data tool to create a new grid file using a minimum curvature gridding algorithm.

READASCIIGRID GX

The GX can be used to read an ASCII formatted grid into a Geosoft grid file.

REFID GX

Use the REFID GX to change the fid sampling of a channel to be based on a reference channel. This is normally done to resample a database based on a distance channel, in which case the new fiducial will be distance.

REFIDDB GX

Use the REFIDDB GX to change the fid sampling of a database to be based on a reference channel. This is normally done to resample a database based on a distance channel, in which case the new fiducial will be distance.

NOTE: If you wish to simply resample the database to give each channel the same fiducial start and increment as a reference channel, use the RESAMPDB GX.

REGRESS GX

Use the REGRESS GX to fit a least-square linear regression to a set of marked data in a channel and report the slope and intercept.

REGRID GX

Use the REGRID GX to re-grid an existing grid. This can be done to change the cell size of a grid, or to apply filters along the grid lines.

RESAMPDB GX

Use the RESAMPDB GX to resample an XYZ database to a new sample interval, based on a distance channel.

RESZMAP GX

Use the RESZMAP GX to resize the data view and base views of a map to fit the currently drawn objects.

RGCON GX

Use the RGCON GX to create a minimum curvature grid using a RANGRID control file.

RMALLCH GX

Use the RMALLCH GX to remove all displayed channels from current database.

RMS GX

Use the RMS GX to import RMS blocked binary data into a Geosoft database.

ROLLINGSTATS GX

Use the ROLLINGSTATS GX to calculate a statistic within a rolling window in a channel.

RPSCNFIG GX

Use the RPSCNFIG GX to carry out channel configuration setups for airborne radiometric data.

RPSCORR GX

Use the RPSCORR GX to correct airborne radiometric data for the effects of spectral overlap (STRIPPING) and height attenuation. It also converts potassium, thorium and uranium data to apparent radioelement concentrations.

RPSFILT GX

Use the RPSFILT GX to perform instrument deadtime corrections on airborne radiometric data, apply nonlinear and lowpass filters to radiometric and/or barometric altimeter data and correct the altimeter data to Standard Temperature and Pressure (STP).

RPSLEVL1 GX

Use the RPSLEVL GX to create background-corrected airborne radiometric data.

RPSLEVLT GX

Use the RPSLEVL GX to create background-corrected airborne radiometric data.

RPSLEVLU GX

The RPSLEVLU GX is the second of three GXs required to apply background corrections to radiometric data. GXs are split to reduce the memory requirements for this part of the RPS system.

RPSRATIO GX

Use the RPSRATIO GX to calculate radioelement ratios. You can also threshold data to eliminate very low denominators and/or apply lowpass filters.

RPSWINDOW GX

The RPSWINDOW GX extracts the Region Of Interest (ROI) windows for K, U, Th, Total Count and Cosmic radiation from spectral radiometric data stored in an array channel.

RUNPDF GX

Use the RUNPDF GX to run a Geosoft Sushi PDF file. A Sushi PDF is a "Program Description File" that controls the creation of a dialog, and the building and running of a command string. This is mainly intended to support Geosoft DOS Sushi developers who have developed Sushi PDFs.

S

 

SAVEDBVU GX

Use the SAVEDBVU GX to save current database editor view.

SAVEGDB GX

Use the SAVEGDB GX to save the current database to a new file.

SAVEMAP GX

Use the SAVEMAP GX to save the current map to a new map name. The original map file will be closed.

SCANASEG GX

Use the SCANASEG GX to scan a given ASEG-GDF file and create a default import template. The template can be edited and modified to remove unwanted channels and to re-name lines as required using the ALIAS keyword.

SCANPICO GX

Use the SCANPICO GX to scan a given Picodas file and create a default import template. The template can be edited and modified to remove unwanted channels and to re-name lines as required using the ALIAS keyword.

SCLMAP GX

The SCLMAP GX is called by other map drawing GX’s whenever drawing to a map for which a map scale has not been defined. This situation most commonly occurs when a map has been opened just to display a grid image. A map scale is required to determine appropriate scaling for drawing text, patterned lines, and other map graphic details.

SCONT32 GX

Use the SCONT32 GX to contour a grid and provide access to contour parameters.

SEARCH GX

Use the SEARCH GX to search for values in the current channel.

SEARCHREPLACE GX

Use the SEARCHREPLACE GX to search and replace values in a channel.

SELALL GX

Run the SELALL GX from a Geosoft Script to select all lines in a database.

SELDIR GX

Use the SELDIR GX to select lines based on line direction.

SELFLT GX

Run the SELFLT GX to select or deselect a single flight.

SELGET GX

Use the SELGET GX to get current selections from a previously saved selection file.

SELLINE GX

Run the SELLINE GX to select or deselect a single line.

SELNONE GX

Run the SELNONE GX from a Geosoft Script to deselect all lines.

SELSAVE GX

Use the SELSAVE GX to save current line/group selections to a file.

SETCHPRJ GX

The SETCHPRJ GX is used to assign a projection to a coordinate channel pair in a Geosoft database.

SETDATAV GX

The SETDATAV enables you to set the current default drawing view on the currently open map.

SETDVIEW GX

The SETDVIEW GX enables you to set the current drawing plane, on an open map, as the "default" drawing plane.

SETIMGPRJ GX

The SETIMGPRJ GX is used to assign a projection to one or more grid or image files.

SETMVWPJ GX

Use the SETMVWPJ GX to display the coordinate projection details of a view and modify the projection.

SETPRNT GX

The SETPRNT GX sets the current printer.

SETTINGS GX

Use the SETTINGS GX to change the default settings for your Oasis montaj environment. These settings are defined in the geosettings.meta file in the %USERPROFILE%\Documents\Geosoft\Desktop Applications\ini directory.

SORTALL GX

Use the SORTALL GX to sort all channels based on a reference channel.

SORTALL2 GX

Use the SORTALL2 GX to sort all channels based on two reference channels. The data is first sorted by a primary reference channel, then for data with the same value in the primary reference channel, the data is sorted by the secondary channel.

SORTALLN GX

Use the SORTALLN GX to sort all channels based on two reference channels. The data is first sorted by a primary reference channel, then for data with the same value in the primary reference channel, the data is sorted by the secondary channel.

SORTCHAN GX

Use the SORTCHAN GX to sort the contents of a channel on each selected line.

SPLTLINE GX

Use the SPLTLINE GX to split a line into two lines at a specified fiducial.

STAT GX

Use the STAT GX to calculate statistics of the currently selected data in DBEDIT.

STATLEV GX

Use the STATLEV GX to calculate a least-squares trend line through an error channel to derive a trend error curve, which is then added to a channel to be leveled. The trend curve can be saved for later inspection.

SYMBOLS GX

Use the SYMBOLS GX to draw symbols on a map at all data points along all selected lines in a database.

T

 

TERNLEG GX

Use the TERNLEG GX to create a Ternary Colour Legend.

TEXTBLK GX

Use the TEXTBLK GX to plot a block of text on a map.

TICK

Use the TICK dialog to plot tick marks at specified intervals on a map.

TILTDRV GX

The TILTDRV GX calculates the tilt derivative of a grid and optionally the total horizontal derivative of the tilt derivative grid.

TINDB GX

Use the TINDB GX to create a TIN (Triangular Irregular Network) file from positions in a database

TINGRID GX

Use the TINGRID GX to create a grid from a Z-valued Triangular Irregular Network (TIN).

TINHULL GX

Use the TINHULL GX to plot the Convex Hull of a Triangular Irregular Network (TIN)

TINMESH GX

Use the TINMESH GX to plot a Triangular Irregular Network (TIN) mesh.

TINNODES GX

Use the TINNODES GX to plot the locations of the Triangular Irregular Network (TIN) nodes.

TINSAMP GX

Use the TINSAMP GX to sample a Triangular Irregular Network (TIN) at locations in a database using the natural-neighbour interpolation method.

TINVORONOI GX

Use the TINVORONOI GX to plot the Voronoi cells of Triangular Irregular Network (TIN)

TOTLDIST GX

Use the TOTLDIST GX to calculate total (cumulative) distance from provided X and Y channels down the lines.

TREND GX

Use the TREND GX to calculate an n'th order trend of a data channel by (least square) best-fit polynomial. The trend is then evaluated and placed in a new channel. An optional residual channel (input - trend) may also be created.

TRENDDB GX

Use the TRENDDB GX to produce trend tie lines from the current database.

TRNDDIGI GX

The TRNDDIGI GX lets you add your own trend line to a database. Your trend line can be included in the gridding process to enforce a particular local trend in the data. To use this GX you should have a database and a map open in the project. The database should contain the original data that is gridded and the map should display a grid image of the data (which may already be trended) together with the current line or data point locations.

TRNDPATH_GX GX

Use the TRNDPATH GX to plot the trend lines found in the current database. These lines are named "R0", for minima, and "R1" for maxima.

U

 

UNLOADCHAN GX

Use the UNLOADCHAN GX to remove (unload) a channel from the spreadsheet.

UNPACKMAP GX

Use the UNPACKMAP GX to unpack a packed map or e-map file.

V

 

V3DADD GX

The V3DADD GX will add an existing View or View/Group to a plane in a 3D view. A 3D View must be selected in an open map to run this GX.

V3DDEL GX

The V3DDEL GX deletes a plane from a 3D View.

V3DIMG GX

The V3DIMG GX creates a 3D View of a grid, either in a new map or centered on the current map.

V3DMAP GX

The V3DMAP GX will either create a new 3D View on a map or add a new drawing plane to an existing 3D View.

V3DSYMB GX

Use the V3DSYMB GX to place coloured symbols on your 3D map.

VA2VA GX

The VA2VA GX will create a subset array channel from a window of an existing array channel.

VA2VA GX

The VA2VA GX will create a subset array channel from a window of an existing array channel.

VA2VV GX

For a given an array channel, the VA2VV GX will create a single-element channel by copying all the array data into a single array. The last value in each array element will be followed by the first value in the next array element.

VAAVERAGE GX

The VAAVERAGE GX will average all rows or columns in a VA on a line-by-line basis and place the results in a channel of each line.

VACOLOR GX

Use the VACOLOR GX to specify a colour zone file used to colour individual profiles in an array channel profile display.

VACVFILT GX

Use the VACVFILT GX to apply a convolution filter to an array channel along the array (row). The filter can be defined in a filter file or in a comma delimited string.

VADISPLAY GX

Use the VADISPLAY GX to specify for an array channel the windows to display, as well as a base and range of values for the database cell profile plots.

VANLFILT GX

Use the VANLFILT GX to apply a non-linear filter to an array channel along the array (row). Non-linear filters are very good for removing high amplitude and short wavelength noise from data. A non-linear filter can be followed by a linear low-pass filter to smooth any low-amplitude noise that may remain.

VAPLOT GX

Use the VAPLOT GX to plot an individual array profile from an array channel in the current database. This GX must be run interactively.

VAPRFSCT GX

Use the VAPRFSCT GX to set option to display Array channels in a database using colours, as well as profiles in each database cell.

VARIOGRM GX

Use the VARIOGRM GX to produce a variogram plot in the current map.

VASCTCOL GX

Use the VASCTCOL GX to specify a colour zone file used to display an array channel in each database cell.

VASORT GX

Use the VASORT GX to sort the rows or columns of an array channel in each selected line.

VAWINDOW GX

Use the VAWINDOW GX to extract the sum or average of values from a window of an array channel to a new channel.

VAWINDOW2 GX

Use the VAWINDOW2 GX to extract a fractional window of an array channel to a new channel.

VIEWCLIP GX

Use the VIEWCLIP GX to reset the clip area of a view to a polygon mask file.

VIEWEXTCLIP GX

Use the VIEWEXTCLIP GX to add or replace a group mask to a view.

VIEWGETCLIP GX

Use the VIEWGETCLIP GX to extract the current mask from a view to a PLY file.

VIEWGETEXTCLIP GX

Use the VIEWGETEXTCLIP GX to extract a group mask from a view to a PLY file.

VIEWLOG GX

Use the VIEWLOG GX to view the processing log file from the editor

VIEWRENEXTCLIP GX

Use the VIEWRENEXTCLIP GX to rename an existing group mask in a view.

VOXCLIP GX

Use the VOXCLIP GX to produce a new Voxel by clipping an existing voxel with topography grid(s).

Voxel Horizontal Slice GX

Use the Voxel Horizontal Slice GX to extract horizontal (plan) grids from a voxel model.

Voxel Section GX

Use the Voxel Section GX to extract vertical slices of a voxel model as grids.

Voxel Surface GX

Use the Create Isosurface from Voxel option to extract an isosurface from a voxel model and plot it to the 3D Viewer.

Voxel Multiple Surfaces GX Use the Create Multiple Isosurfaces from Voxel tool creates a geosurface with multiple isosurfaces extracted from a voxel.

VOXSTAT GX

Use the VOXSTAT GX to report and modify information about a Geosoft Voxel, including simple statistical information and coordinate system information.

VIEWRENEXTCLIP GX

Use he VIEWRENEXTCLIP GX to rename an existing group mask in a view.

VSCTDPCH GX

Use the VSCTDPCH GX to create a depth (array) channel.

VV2VA GX

Given a single element channel, the VV2VA GX will copy the data to an existing array channel. The array data will be filled row-by-row from the contents of the single element channel.

W

 

WARPDATA GX

This GX will allow you to create a pair of new coordinate channels from an existing pair of coordinate channels. Specifically, it will enable you to apply a warp to existing X and Y channels and enter the results in a new set of channels with names you specify. You can then apply other operations such as gridding to the newly warped data.

WARPFILE GX

Use the WARPFILE GX to create an output Warp file.

WARPGRDA GX

Use the WARPGRDA GX to attach a warp to a grid.

WARPGRID GX

Use the WARPGRID GX to warp the location of a grid.

WINEXEC GX

Use the WINEXEC GX to open a command console and run a process.

WINOLD GX

Use the WINOLD GX to restore the original X and Y channels after windowing the default X and Y channels. The original X and Y were saved in channels \"__X\" and \"__Y\".

WINRECT GX

Use the WINRECT GX to define a rectangular mask for plot masking. The WINXY GX can be used to mask the data to the *.ply file.

WINXY GX

Use the WINXY GX to mask the X and Y channels to the area defined by a polygonal mask file. This causes all map based processing that follows to only use the data within the defined region.

WINZ GX

Use the WINZ GX to Window the X and Y channels to the area defined by given range Zmin/Zmax of a mask channel (Z). This causes all map based processing that follows to only use the data within the defined region.

X

 

XLEVEL GX

Use the XLEVEL GX to create level information channels by extracting required data from an intersection

XY2LL GX

The XY2LL GX will convert local X, Y coordinates to longitude, latitude based on a common known location and the direction of the local coordinate system.

XYFILL2 GX

Use the XYFILL2 GX to replace all dummies in X/Y channels by linear, cubic spline or max. entropy prediction interpolation.

XYGET GX

The XYGET GX overwrites the current X and Y channels using original X and Y information that has been stored in backup channels _X and _Y.

XYROTATE GX

Use the XYROTATE GX to rotate a coordinate system.

XYSAVE GX

The XYSAVE GX saves the current X and Y channels in backup channels _X and _Y. This GX is intended for users who want to apply some sort of transformation (such as a rotation, coordinate projection or translation, etc.) and keep a copy of original channels in case of errors or for future reference.

XYSCALE GX

The XYSCALE GX allows you to set the X and Y scales separately in a data view from the currently open map.

XYSET GX

Use the XYSET GX to set the channels to use as the current X (Easting) and Y (Northing).

XYTRNS GX

Use the XYTRNS GX to translate and apply scale factor to coordinates.

XYZLINE GX

Use the XYZLINE GX to break a line into component lines based on tolerance of lateral distance. This will convert a neutral format line to Geosoft's XYZ format lines.

XYZSTAT GX

Use the XYZSTAT GX to produce a statistics summary report of a selected list of channels of all selected lines in the current database.